Metal Magnesium Balling Machine

The purpose of using metal magnesium balling machine is to reduce dust pollution, control capacity, recycle waste and facilitate transportation. In steel mills, lime mills, metallurgy, refractory furnaces, magnesium mills, the use of calcined white powder balls is very extensive.

 

The main structure of magnesium powder ball press is composed of transmission system, main frame, reducer, belt conveyor, preloading device, ball groove alignment device of roll sleeve, hydraulic system and electronic control. Magnesium oxide powder is quantitatively and evenly added to the pre-pressing device of the ball press to maintain a stable material level in the pre-pressing device. Then the pre-pressing screw in the pre-pressing device forces the magnesia powder into the middle of the roll to pre-compress the material and transport it to the arc groove of two pairs of rolls. Two pairs of roll sockets with uniformly distributed shapes on the surface of the rolls are meshed and driven to make two pairs of rolls equal. With speed and reverse rotation, the magnesia powder conveyed to the groove is bitten into the groove and forced to compress. As the counter roll continues to rotate, the magnesia powder is peeled under its elasticity and gravity. With the continuous rotation of the motor, the roller makes periodic rotational pressing movement to realize mass production.

 

Metal Magnesium Press Ball Machine is suitable for: white lime powder, metal Magnesium powder, dust removal dust, aluminium ash powder and other materials that do not allow moisture content; materials that allow moisture content should use wet powder Press Ball Machine, because dry powder Press Ball Machine consumes more than wet powder Press Ball Machine, and the purchase cost is higher.