Mechanism Charcoal Molding Sleeve is one of the important parts of the mechanism charcoal machine, which is also easy to overlook by the general production users. The wear resistance is critical to the performance of the whole charcoal machine because the sleeve is resistant High temperature wear, the design size is equally important. For example, the length of the thickness of the relationship between the rod left in the heat on the sleeve of the impact of the rod. The degree of extrusion resistance of the oversized sleeve is reduced, and if it is easy to break the alloy wear material, the time it takes for the rough heating coil to react to the raw material to be softened is insensitive. As a result of the boot in order to reduce the motor starting current, we generally want to set a relatively high starting temperature, this time if the sleeve is too thick to easily out a lot of rotten rods, but a good bar density, no experience of the operator If not timely or early heating is easy because the temperature is too low and the motor does not move and stop the stick. At the same time, the current design of the sleeve size of the actual effect of the rod is equally important, if the machine screw propeller maximum diameter design size is 65 mm, corresponding to the sleeve diameter 60 can be a good pressure, if it is more than 76 Should be a corresponding increase in sleeve diameter in order to achieve the desired out of the bar speed.
      Mechanism charcoal production generally requires four steps:
1, the crushing process In the crushing process, the need to collect the raw materials crushed by crusher for the size of granular;
2, drying process after crushing equipment after crushing the particles through the dryer after drying equipment, resulting in a certain degree of drying material;
3, rod procedures with a certain degree of drying of raw materials through the rod made of high-temperature suppression of a rod-like;
4, carbonization process made into a bar, after carbonization furnace charcoal, after cooling is the mechanism of charcoal.

Gongyi Tongli Machinery Factory is specialized in manufacturing and exporting of charcoal equipments and charcoal forming machine. The products produced by Tongli Machinery mainly include charcoal production equipments such as crusher, dryer,rod making machine, carbonization furnace and auxiliary equiptments like charcoal forming machine, belt conveyor, drumscreen, etc.