The Reason Why Charcoal Rod Making Machine Cannot Mould

In manufacturing process, charcoal rod making machine can not mould or the rod steadily shed sometimes. The reason is below:

The wear of propeller system of charcoal rod making machine is the reason. It should be repaired.

Repair method is: Preheating the parts of propeller system which need surfacing. When the temperature reaches 200 degrees, weld it by wear-resisting electrode. Welding thickness is 1-2mm more than the desired thickness. Cool if after welding. When the temperature is below than 50 degrees, remove and grind it on silicon wheel. No collision and percussion on the repaired propeller and it should be stored carefully for using.

Charcoal machine manufacturer – Gongyi Tongli Machinery Factory design new charcoal equipment by their own innovative ideas, innovate charcoal machine, improve design process, greatly improved the production capacity. They also add dust remover in charcoal machine, reduce noise. ,thus provide cost-effective charcoal machine for customers.

Homepage: www.cncharcoalmachine.com
Alibaba website: http://hntljx.en.alibaba.com/
E-mail: tonglimachine5@cncharcoalmachine.com