Welcome to TONGLI Machinery

Using Guides of Charcoal Rod Machine

Charcoal Rod Machine can compress sawdust, bamboo, wood, shells, straw and other waste biomass materials into rod briquettes through high pressure, high temperature. After carbonization, users can get rod charcoal rods.
 
Charcoal Rod Machine

Charcoal rod machine is composed of body machine, motor, small electricity control box, and screw pusher, foming mould and heating rings. Gongyi Tongli Machinery Factory is a well-known charcoal rod machine manufacturer. We design charcoal rod machine by our own innovative ideas, innovate charcoal rod machine, improve design process, greatly improved the prodthe charcoal rod machine, at the very beginning, you need to feed very slowly, once the foming mould is full of sawdust, then you can feed normally.

Tongli charcoal rod machine have been exported to Russia, Uzbekistan, Myanmar, Vietnam, Laos, Kazakhstan and many African countries. For more information, please view our website or contact us via theuction capacity, thus provide cost-effective charcoal rod machine and professional technical guide to our customers.

Below are the using guides of charcoal rod machine offered by Tongli:
1. Please make sure the charcoal rod machine was settled up well, especially for the motor, heating rings wire contacting.
2. The moisture of the feedstock must below 10% at least; otherwise the sawdust will get stock in the feed port.
3. When you feeding  following Email.

Homepage/ http://www.cncharcoalmachine.com
E-mail/ evelyn@cncharcoalmachine.com