Troubleshooting Method of Rubber Crusher

Rubber crusher is the rubber picking machine, which is very popular in the rubber industry at present. Rubber crusher equipment inserts rubber hose into the core shaft, and gradually pushes rubber hose in, while the core shaft does not rotate, while the tool pole rotates under the drive of the motor, and the turning tool is firmly installed on the tool pole, so that the rubber hose is only pushed in, and it is cut off by the turning tool. When the turning is finished, the rubber hose can be pulled out. Hengle Rubber Crusher is easy to operate and has high benefits.

 

1. In the rubber crusher work, there is insufficient oil pressure to check the pressure pump, if it is the problem of pressure bar, improve the pressure bar.

2. Inspect the mixing gun and hose during crushing.

3. The amount of rubber produced by rubber crusher can not meet the requirement, so the rubber gun and hose need to be cleaned thoroughly.