What should we do if there is a problem at the bottom of the screen of the metal crusher?

Screen bottom plays an important role in metal crusher. No matter what kind of crushing equipment the parts inside are indispensable. Daily life can be reflected, often used things lack a corner feeling are less what is very inconvenient to use, let alone the configuration of metal crusher. The main crushing parts of metal crusher are the bottom of the screen and the hammer head. When waste materials are crushed, the bottom of the screen wears the most. The wear of the bottom of the screen is also the reason for the roughening of the prescribed material. If the wear is not serious, the bottom of the screen should be repaired.

 

How to distinguish the wear of screen bottom in the production process of metal crusher? Hongrun Machinery tells users that they need to observe the particle size of metal particles first. If the particle size of material is irregular or the material fluctuates, the technical parameters should be adjusted in time. Observe again whether the bottom is caused by the wear of the bottom of the screen. If it is caused by the metal crusher that must be stopped immediately, remove the bottom of the screen and replace it. Users should not feel that the problem is not big, continue to produce this will be small and big. Small wear can be solved by treatment. If wear is not possible, the bottom of the screen should be replaced. The newly installed screen bottom should be tightened to ensure smooth contact between the screen bottom and the surface of the body. If the flatness can be padded with a layer of lead plate or something in the middle, let the bottom of the screen of the metal crusher and the fixed screen plate come out in the teeth state. Much attention should be paid to the replacement of multiple sieve bottoms, which is related to the future production of metal crushers.